MEASURES
-
Rails: +/- 24VDC under load
-
DC offset at speaker teminals: +/- 2mV
-
BIAS: 1.3A (0.61V on R13/R14)
-
Voltage gain: 10 (20dB)
-
THD+N (at 1 Watt into 8 Ohms at 1kHz): 0.08%
-
THD (at 1 Watt into 8 Ohms at 1kHz): 0.04%
MEASURES
-
Rails: +/- 24VDC under load
-
DC offset at speaker teminals: +/- 2mV
-
BIAS: 1.3A (0.61V on R13/R14)
-
Voltage gain: 10 (20dB)
-
THD+N (at 1 Watt into 8 Ohms at 1kHz): 0.08%
-
THD (at 1 Watt into 8 Ohms at 1kHz): 0.04%
 |  |  |
|---|---|---|
 |  |  |
 |  |
| | |
|---|---|---|
| | |
| |
NOTES
-
R7 changed to 52.3k to remove excess negative DC offset at the output of the amp
-
R4 changed to 8.2 Ohms and 220uF bipolar capacitor added to remove DC offset at Edcor input (pin 1)
-
Boards, Edcor transformers and MOSFETs from TeaBag
-
Harris IRFP9240 MOSFETs
-
Matched Toshiba JFETs from FET Audio
-
Dual mono implementation
-
2 x 250VA transformers from Toroidy - 230V primary, 2x18V secondary
-
8 x 22000uF KEMET PEH200 in power supply
-
Deluxe 4U chassis from Hi-Fi 2000
RESOURCES
-
Manual: First Watt M2
-
diyAudio: Official M2 schematic, M2 Clone boards with 120mm UMS spacing
-
Other: Edcor
Last update: 10.03.2019.
NOTES
-
R7 changed to 52.3k to remove excess negative DC offset at the output of the amp
-
R4 changed to 8.2 Ohms and 220uF bipolar capacitor added to remove DC offset at Edcor input (pin 1)
-
Boards, Edcor transformers and MOSFETs from TeaBag
-
Harris IRFP9240 MOSFETs
-
Matched Toshiba JFETs from FET Audio
-
Dual mono implementation
-
2 x 250VA transformers from Toroidy - 230V primary, 2x18V secondary
-
8 x 22000uF KEMET PEH200 in power supply
-
Deluxe 4U chassis from Hi-Fi 2000
RESOURCES
-
Manual: First Watt M2
-
diyAudio: Official M2 schematic, M2 Clone boards with 120mm UMS spacing
-
Other: Edcor
Last update: 10.03.2019.
Iron Pre
Based on Zen Mod's design. JFET buffer followed by autoformer attenuator controlled by Arduino microprocessor.
Please refresh the page if you see "This video is unavailable" above.
ATTENUATION DETAILS
MEASURES
-
Rails: +/-15VDC
-
DC Offset: 0.1mV
-
Gain 0dB
NOTES
-
3 inputs, 2 outputs
-
Custom built autoformers by Dave Slagle
-
Optical rotary encoder
-
Reed relays
-
OLED display
-
Apple remote
RESOURCES
-
diyAudio forum: What's wrong with the kiss,boy, Iron Pumpkin(s) and other smaller vegetable animals, Arduino based LDR volume and source selection controller
-
Autoformers: intact audio
-
Reed relays: Pickering Electronics
Last update: 11.06.2023